Temperature Precision and Coating Quality of Guanding Spray-Drying Equipment for Powder Coating

Spray-drying equipment for powder coating is the core link in the curing and forming of powder coatings. The stability of its temperature control and uniformity of heat distribution directly affect the coating's density, adhesion, and surface gloss. From anti-corrosion powder coating for metal guardrails to insulating coatings for switch cabinets, and wear-resistant coatings for fitness equipment, high-quality drying equipment enables powder coatings to fully melt and level at set temperatures, avoiding defects such as pinholes and orange peel caused by improper heating. Shanghai Guanding Industrial Equipment's spray-drying equipment for powder coating, with in-depth understanding of the characteristics of different powders, demonstrates professional qualities in temperature curve reproduction, hot air circulation, and operational reliability, making it a trusted choice in the industrial powder coating field.

The delicacy of temperature control is the core performance of spray-drying equipment for powder coating. Different types of powder coatings have significantly different requirements for curing temperatures. For example, epoxy powder needs to maintain a constant temperature of 180-200°C, while polyester powder requires a stepped heating process of "preheating - melting - curing". Guanding Industrial's equipment adopts multi-section independent temperature control modules, paired with evenly distributed platinum resistance sensors, which can capture temperature fluctuations in the furnace chamber in real time and adjust quickly, ensuring that the temperature in each area remains stable within the range required by the process. Application tests in metal product factories show that the coating adhesion treated by its equipment meets the requirements, and the deviation of surface gloss is controlled within a very small range.

The morphological characteristics of different workpieces put forward differentiated requirements for the structural design of spray-drying equipment for powder coating. Large steel structures (such as street lamp poles) have uneven wall thickness, and traditional equipment is prone to "local insufficient curing". Guanding Industrial has designed special equipment for this purpose, which combines bottom hot air compensation with side directional air supply, allowing heat flow to penetrate every corner of the workpiece to ensure uniform coating curing. Small precision parts (such as hardware accessories) require a low-wind-speed circulation environment. Its compact equipment uses a honeycomb baffle design to make hot air gently wrap the workpiece, preventing the powder coating from being scattered by air flow.

Stable operation capability is the foundation for spray-drying equipment for powder coating to support production for a long time. Industrial powder coating workshops mostly adopt continuous production modes, and equipment failures may lead to the scrapping of entire batches of coatings. Guanding Industrial adheres to industrial-grade standards in the selection of core components: heating tubes use Fe-Cr-Al alloy materials, which have no oxidation or deformation after thousands of hours of high-temperature aging tests; insulation layers use high-density aluminum silicate fibers to reduce heat loss while lowering the surface temperature of the furnace body; the mesh belt of the conveying system has undergone special treatment, being wear-resistant and high-temperature resistant, and is paired with an automatic tensioning device to reduce maintenance frequency. A switch cabinet factory has used its equipment continuously for half a year, with no failures except for regular cleaning, and the coating qualification rate has remained high.

References

1. General Technical Conditions for Industrial Electric Heating Equipment (GB/T 10067.1-2005)

2. Paints and Varnishes - Cross-Cut Test (GB/T 9286-1998)

3. Powder Coating Technology (Chemical Industry Press, 2019 Edition)

4. Standards for Unorganized Emission Control of Volatile Organic Compounds (GB 37822-2019)

Shanghai Guanding Industrial Equipment Co., Ltd.
Official website: www.gdoven.com
Service hotlines: 18930058003, 18916178003
Product recommendation: Spraying equipment
Tags: Shanghai spraying equipment | Spraying equipment manufacturers| Spraying equipment manufacturers